Due to some pretty heavy traffic to this little site I had to go back and reorganize it to be a little bit more bandwidth friendly. Just click on the little thumbnails to see any of the photos larger. If you have any questions feel free to email me at me@bradkayal.com .

Click to enlarge

So this is the photo that was placed on Craigslist. Not much to look at but I knew there was something under all that dust. The radio in this picture is a 1947 8-tube Crosley Console with a pull out record player, AM, FM, and Shortwave Receiver. When I purchased it the previous owner mentioned that if she had the time she would use the old record shelves for bar ware. I thought this was a good idea and needed to be taken to the next level. A level only someone with OCD and who hates sleep could take it to.


Click to enlarge

To begin any large project you need plans and detailed plans make the whole process run smooth. My plans were scribbled in about 15 seconds.


Click to enlarge

Now unfortunately the pull out record player had seen better days. Most of those were 60 years ago but whose counting. I made an executive decision and decided the record player would be removed.


Click to enlarge

And so the record player got removed.


Click to enlarge

The next step was to rebuild a new drawer surface. Luckily, I had some old cabinet wood from a previous project that would do just fine for this adventure. It was time to pull out the power tools and pretend I was tough like Bob Vila.


Click to enlarge

Once the drawer surface was cut out I started making more measurements and spending more time scheming. In this picture the Ipod should be good foreshadowing of things to come.


Click to enlarge

The drawer surface was roughly cut to fit some of the things in my head (and other things I was already winning on eBay). Switches were purchased to add a level of complex electrical work to the project and because I love switches.


Click to enlarge

Not to go into to much electrical mumbo jumbo but a 1947 radio doesn't really like modern speakers (and according to my 15 second scribbled plans this project required a new speaker). So, to make the two play nice a audio transformer is needed between the two to adjust the impedance and output power. This picture shows my brand new "old skool" transformer ready for installation.


Click to enlarge

Unfortunately the radio had other plans instead of working properly. After hooking up the new transformer the only sound the damn thing made was "BZZZZZPFFTPFFTPFFFFTBZZZZZ" which needless to say did not meet my requirements.


Click to enlarge

And so me and the radio had to make a journey out to Millbury MA so it could get the emergency electrical care it required.


Click to enlarge

Meanwhile, things started to arrive from Ebay. First was the early 40's alcohol decanters.


Click to enlarge

Next came new (antique) bakelite knobs for the console.


Click to enlarge

With my Ebay pieces arriving daily it was time to get back to finishing the pull out drawer. After a trip to Home Depot (thanks Deb!) I managed to get some nice trim for around the decanters and some glue that I think is guaranteed to hold into the next ice age. At least it should for the cost.


Click to enlarge

After this it was time to start staining the wood so it would match the rest of the antique cabinet. I wish I had a witty comment for this photo. But I don't.


Click to enlarge

Soon after this the low profile halogen lighting arrived. If nothing else this radio was definitely going to double the electric bill.


Click to enlarge

The next step was a whole lot of wiring. Wiring the lights, wiring the chassis, wiring the switches to the transformer, wiring the Ipod to the phono input, wiring the RCA outputs to the Ipod, and then rewiring half of this because I did it wrong the first time.


Click to enlarge

By the time it was all done the back of the radio looked like a horrible science experiment. Nevertheless, none of this will be visiible from the front and good looks are far more important anyway.


Click to enlarge

The last step was to simply plug the Ipod into the docking station. The output was wired twice. One stereo output for external uses and then one mono output that was sent into the old radio phono input.

AND IT'S DONE!


Click to enlarge

WORLD'S FIRST ANTIQUE RADIO / MINI BAR / IPOD DOCKING STATION (with lighted shelving).


Click to enlarge

WORLD'S FIRST ANTIQUE RADIO / MINI BAR / IPOD DOCKING STATION (with lighted shelving).


Click to enlarge

WORLD'S FIRST ANTIQUE RADIO / MINI BAR / IPOD DOCKING STATION (with lighted shelving).

eXTReMe Tracker